Natta · sleep timer for Android
The sleep timer that switches your earbuds off.
Fall asleep to music, a podcast or the radio. When the timer runs out, Natta fades the sound out and pauses it. On supported earbuds it then switches them off, so they don't drain all night and are still charged in the morning.
Screenshots
At a glance
Natta in short
- What it is
- A sleep timer that also puts your earbuds to sleep
- Platform
- Android 8.0 and later English and Norwegian
- Works fully with
- Nothing Ear and CMF Buds Tested on CMF Buds 2
- Measured saving
- 1–2 % battery per hour instead of about 10 % One pair of CMF Buds 2
- Price
- Free with ads Remove them once: 19 kr / US$1.59
- Status
- Coming soon to Google Play By Kenaz Labs, Norway
The problem
Earbuds stay on all night, even when the music stops
A normal sleep timer stops the audio, but the earbuds stay connected and switched on. In-ear detection tells them they are still being worn, noise cancelling keeps running, and lying on them wakes them up again. By morning the battery is close to empty.
Earbuds only switch themselves off after they have been disconnected and left alone, often for about an hour. Natta makes that happen. The background is in our guide, Why earbuds drain overnight.
How it works
Three taps at bedtime
- Pick your earbuds and a timeChoose the earbuds you are wearing and how long you want to listen.
- Tap “Next”The “Ready for bed” screen shows the earbuds' battery, when the sound fades out and when the earbuds switch off.
- Tap StartThe countdown runs with the screen off. Cancel and +15 min are there if you are still awake.
What Natta does when the timer runs out
- Fades the sound outThe volume goes down slowly over the last two minutes, so you don't wake up when it stops.
- Pauses the audioWorks with any app that plays sound: Spotify, YouTube Music, podcasts, radio and audiobooks. Then the volume is set back to where it was.
- Puts the earbuds in night modeOn supported earbuds, Natta turns off in-ear detection, noise cancelling and the press-and-hold gesture.
- Disconnects themThe earbuds drop the connection to the phone and switch themselves off after a while: about an hour on CMF Buds 2.
- Guards the nightIf you lie on the earbuds and wake them, Natta disconnects them again within seconds. Earbuds you take out of the charging case are left alone.
- Restores everything in the morningTake the earbuds out of the case, or tap “I'm awake”, and your settings go back to how they were when you started the timer.
Measured
Battery used per hour overnight
Measured on one pair of CMF Buds 2, from the earbuds' own battery reports, in November 2026. It is one pair and a few nights, not a lab test, and your numbers will depend on your earbuds.
If those rates held for eight hours from a full charge, you would wake up to about 20 % without Natta and about 85–90 % with it. The nights, times and readings are in the battery guide.
Compatibility
Which earbuds Natta can switch off
| Earbuds | Support | What Natta does |
|---|---|---|
| CMF Buds 2 | Tested | Fade, pause, night mode, disconnect, night guard and morning restore. The earbuds power off about an hour after the disconnect. |
| Nothing Ear and other CMF Buds | Supported | Same as CMF Buds 2, over the same control protocol. Not every model has been tested. Nothing Ear powers off about four hours after the disconnect. |
| Sony WF-1000XM3, XM4, XM5, WF-C series, LinkBuds | Beta | Fade, pause and power off. Not yet tested on real earbuds; turn on beta drivers in the settings. |
| Soundcore Liberty, Space and P series | Beta | Fade, pause, in-ear detection off and disconnect. Not yet tested on real earbuds; turn on beta drivers in the settings. |
| Samsung Galaxy Buds | Timer only | Fade and pause. Natta cannot switch them off. |
| All other Bluetooth earbuds, headphones and speakers | Timer only | Fade and pause. |
Have Sony or Soundcore earbuds? The beta drivers need real-world reports. “Send feedback” in the app opens an email with a log you can read before you send it.
Natta is an independent app and is not affiliated with Nothing, Sony, Anker or Samsung. Brand names are used only to describe compatibility.
Price
Free, with one purchase to remove ads
Natta is free. A short ad plays between the Next button and the Ready for bed screen, but never during the first week after you install it, and never when you cancel or add 15 minutes. A one-time in-app purchase removes the ads for good: 19 kr in Norway, US$1.59 in the United States, and a similar local price elsewhere, shown by Google Play before you buy.
Natta itself collects nothing: no account, no analytics, no servers. The ads come from Google AdMob. The details are in the privacy policy.
Questions
Frequently asked questions
Why don't my earbuds turn off when I fall asleep with them in?
Wireless earbuds only power off on their own after they have been disconnected and left alone for a while: about one hour on CMF Buds 2 and about four hours on Nothing Ear. While they stay connected to your phone they stay on, and noise cancelling keeps running. A normal sleep timer only stops the audio, so the earbuds keep draining all night.
How much battery do earbuds use overnight?
In our own measurements on one pair of CMF Buds 2 in November 2026, the earbuds used about 10 % battery per hour when left connected without audio, and 8–9 % per hour when they were disconnected but kept waking up in bed with noise cancelling on. With Natta's night mode they used 1–2 % per hour. That is one pair over a few nights, so treat the numbers as an indication.
Which earbuds does Natta support?
Natta is tested on CMF Buds 2. Nothing Ear and other CMF Buds use the same control protocol and are supported, but not every model has been tested. Sony (WF-1000XM3 to XM5, WF-C series, LinkBuds) and Soundcore (Liberty, Space, P series) have beta support that is not yet tested on real earbuds. With Samsung Galaxy Buds and all other Bluetooth earbuds, headphones and speakers, Natta fades out and pauses the audio but cannot switch them off.
How long does it take before the earbuds actually power off?
Natta disconnects the earbuds as soon as the timer runs out. The earbuds then power themselves off after a period without a connection: about one hour on CMF Buds 2 and about four hours on Nothing Ear. Until then noise cancelling is off, and the night guard disconnects them again if they wake up.
Does Natta work with any audio app?
Yes. Natta fades the volume and sends a standard pause command, so it works with Spotify, YouTube Music, podcast apps, radio apps, audiobooks and anything else that plays audio on Android.
What happens if I roll over onto my earbuds during the night?
Pressure on the earbuds can wake them, and they reconnect to the phone. Natta's night guard notices and disconnects them again within a few seconds. It also turns noise cancelling off again if a press switched it on. Earbuds taken out of the charging case are recognised and left alone.
What happens in the morning?
When you take the earbuds out of the charging case, or tap “I'm awake” in Natta's notification, Natta turns in-ear detection back on and puts noise cancelling and the press-and-hold gesture back the way they were when you started the timer.
Can I cancel the timer or add more time?
Yes. The countdown has two buttons, Cancel and +15 min. If the sound has already started to fade, the volume goes straight back to where it was. Neither button ever shows an ad.
Does Natta need root or special access?
No. Natta uses standard Android permissions: Nearby devices (Bluetooth) to talk to your paired earbuds, notifications to show the countdown, and optionally exact alarms so the timer stops on the minute. It also runs a foreground service and holds a wake lock so the timer keeps going with the screen off.
Does Natta collect my data?
Natta itself collects nothing and has no servers. The timer and settings are stored only on your phone, and the Bluetooth commands never leave it. The free version shows ads from Google AdMob, which collects data such as the advertising ID; you can buy “Remove ads” once to turn the ads off. See the privacy policy for details.
Is Natta made by Nothing, Sony, Anker or Samsung?
No. Natta is an independent app made by Kenaz Labs in Norway. It is not affiliated with or endorsed by any earbud maker. Brand names are used only to describe compatibility.
How much does Natta cost?
Natta is free. A short ad plays between the Next button and the Ready for bed screen, but never during the first week after you install it, and never when you cancel or add 15 minutes. A one-time in-app purchase removes the ads for good: 19 kr in Norway, US$1.59 in the United States, and a similar local price elsewhere, shown by Google Play before you buy.
Which phones and languages does Natta support?
Natta runs on Android 8.0 and later. There is no iPhone version. The app is in English, with a Norwegian translation.
Where can I download Natta?
Natta is coming soon to Google Play. It is not published yet, so there is no download link. This page will link to it when it is out.
Something else? Write to support@kenazlabs.com.
The name
Natta
“Natta” is what Norwegians say to children at bedtime: time to sleep. It is also a nudge to your earbuds.



